JBL Flip 4 Won’t Turn On (Fixed)

It’s summertime and you have a ton of parties to host and to go to which also means you need to get the life of the party started, that is the speakers.

At times like these, when you need a wireless sound system that has no problem with network connection, the best option is to try out the JBL Flip 4 speaker.

But, suppose your JBL Speaker won’t turn on because of some reasons.

It’s irritating. (I know because I faced it.)

Well, At times, we just want to know the reason why the speaker is not working properly.

Since I’ve faced this issue hence I know how to fix it. So, here Is the article on JBL Flip 4 Won’t Turn On (Fixed).

The JBL Flip 4 can even connect up to 2 devices to provide you with that DJ experience that you need outdoors.

Wherever you are, the JBL Flip 4 speaker will make sure that it provides you with amazing sound quality. You can easily connect the speaker via Bluetooth to any device.

Even if you do not have a source to connect through Bluetooth, the JBL Flip 4 speaker also comes with a wire to connect your device right beside to charging port.

JBL Flip 4 Won’t Turn On (Fixed)

JBL Flip 4 is a portable Bluetooth speaker that delivers the best high-quality stereo sounds.

The compact speaker is a 3000mAh rechargeable Li-ion battery that provides up to 12 hours of continuous high-quality audio playtime.

It is wireless, made of waterproof fabric material, and even provides voice assistant integration. Any electronic device at some point experiences a hiccup and stops working.

While this may be saddening for the person who wants to listen to music, it doesn’t mean that you cannot fix your JBL Flip 4 speaker yourself at home.

So, did you just get your brand new JBL Flip 4 speaker, used it for a few days, and then one day it suddenly stops switching on.

That is certainly a disappointment and there could be many possible reasons for this issue. It could possibly be an internal tech issue, the battery might not be charged or there might be a serious system issue.

Whatever it is, the problem can be annoying especially when you want to listen to your favorite track. Here are a few reasons and ways you can fix your JBL flip 4 yourselves.

1. Proper Bluetooth Pairing (Reset)

Are you sure that your device is connected to the speaker?

To ensure that the Bluetooth on both the devices is switched on and connected together to be able to hear sounds.

If you’ve used your JBL Flip 4 speaker at a pool party before and have submerged it in the water, this could also be a reason.

Although the JBL Flip 4 is waterproof, sometimes the water doesn’t dry up properly for your next time. Hence, make sure it’s dried up and even wipe it with a dry cloth.

2. Software Issue

Most of the time, there can be a system software issue causing the speaker to not work. To fix this, the easiest way is to restart or reset the JBL Flip 4 speaker.

Simply, press and hold the “Volume up” and “Play” buttons simultaneously until the device turns off itself. It may take a few seconds for the device to turn off.

Then press the power button once to turn on the device. This should work, but if it doesn’t then proceed with the next cause and fix it.

3. Low Battery

You might forget to charge your speaker properly. This happens quite frequently where sometimes you forget to check whether the cable is connected properly to the JBL Flip 4 speaker.

JBL Flip 4 speaker requires a minimum of 3 hours to 3.5 of continuous charging to be able to play your favorite tunes for up to 12 hours.

Although you must have been provided with a manual for charging your speaker, here are a few instructions:

• Locate the charging port which should be behind the speaker and on the right side of the power button. The charging point is safely hidden behind a covered port.
• Connect the micro USB cable that is provided to you with the speaker inside the port and insert the larger side of the cable to your laptop or a device.
• Once properly connected the three dots indication on the speaker will light up. If your device is low on battery, two dots will light up with the second one blinking. Finally, when it’s charged, none of the dots will blink and your issue should be fixed.

4. Internal Battery Failure

Even after you’ve connected the cable charging wire to your JBL Flip 4 speaker, and none of the three dots are lighting up, it means there could be an issue with the internal battery which might not allow your JBL Flip 4 speaker to turn on.

In a case like that, it is best to replace the battery with a new one and to make sure that you don’t overcharge your speaker or place it in a heated environment which could damage the battery once again.

5. Cable Is Broken

Another cause could be that your cable wire that charges the speaker is broken or damaged. Many times we accidentally damage the wire by pulling it hard.

Check the wire for any damages then decide whether the cable wire or battery needs to be replaced.

6. Motherboard Failure.

Lastly, chances are you’ve dropped your JBL Flip 4 speaker too hard on the ground causing the internal board or internal elements to be dislocated.

If none of the above trials work, as silly as it sounds, try shaking and dropping your speaker on a carpet once. Most of the time it works but if it doesn’t, that means the issue is definitely big.

It’s best then to approach an experienced technician who can help troubleshoot the problem better or approach the JBL Company who might even offer you a replacement for your JBL Flip 4 speaker.

Conclusion

To sum it up, it’s not a matter of panic if your JBL Flip 4 speaker wouldn’t turn on. It’s an electrical device that can have minor problems from time to time.

Try charging, resetting, and shaking up your JBL Flip 4 speaker at home to fix the issue. If it still doesn’t work then take it up to an experienced technician or the JBL Company.

Meanwhile, you may also check out our article on How to connect JBL Speakers to iPhones.